mywifiextd.net

Call Now

Netgear EAX18 Setup | AX1750

The Netgear EAX18 Setup, an AX1750 Wi-Fi range extender, is very easy to set up. Connect it to the network, plug it in, and use a web browser to get to the setup page. To set it up using the specifics of your current Wi-Fi network, follow the on-screen directions. After it’s finished, make the most of increased Wi-Fi coverage that will keep all of your devices reliably connected throughout your room.

New Extender setup

Netgear EAX18 Extender Setup Manual Method

  • Click on the Netgear EAX18, create an Ethernet or Wi-Fi connection, and use mywifiext.net setup or 192.168.1.250 in your browser to view the setup page.
  • Use the default login information, which is often admin for both the username and password.
  • Configure the Wi-Fi settings by following the setup guide.
  • Choose the Wi-Fi network you currently use and type in the password.
  • If required, modify the extender’s parameters and save them.
  • Reconnect your device to the increased Wi-Fi network after the extender has restarted.

Netgear EAX18 AX1750 Extender Setup WPS Method

  • Click the WPS button on the Netgear EAX18 after plugging it in.
  • Hit the WPS button for two minutes.
  • Wait off until the extender’s WPS LED solid white, confirming a successful connection.
  • For best coverage, move the extender to the center.
  • Join the expanded Wi-Fi network with your devices.
  • To make any other setup changes, go to mywifiext.net or 192.168.1.250 to access the extender settings.

How To Login Netgear EAX18 Extender ?

  • In a web browser, type 192.168.1.250 or mywifiext.net login after connecting to the EAX18 network over Ethernet or Wi-Fi.
  • Make use of the default credentials to log in.
  • Get into the Netgear EAX18 configuration screen.
  • When required, change the extender’s settings.
  • If you make any changes, save them, then close the interface.
  • A reliable connection to the expanded Wi-Fi network should be created.

How To Update Firmware Netgear AX1750 EAX18 Extender ?

  • After creating a Wi-Fi or Ethernet connection with the EAX18, use a browser to navigate to its settings page by typing in mywifiext net setup or 192.168.1.250.
  • Enter username and password to log in.
  • Go to the Maintenance or Settings area.
  • Choose Firmware Update and then press or touch Check for Updates.
  • Follow the on the screen instructions if an update is available.
  • To apply the updates, restart the extender after the upgrade.

Netgear AX1750 EAX18 Reset Process

  • Find the EAX18’s reset button, which can be found on the side or bottom.
  • Hold down the reset button with a paperclip or other such device for approximately ten seconds.
  • After the power LED blinks, release the reset button.
  • A reboot of the EAX18 will indicate that the reset is finished.
  • After the reset process, adjust the extender’s settings as required.